SS EquipmentRLAF Dispensing & Sampling Booth
A reverse laminar air flow booth for weighing, sampling and dispensing powders with operator protection.
Reverse laminar air flow units protect both the product and the operator during powder handling. HEPA-filtered air flows down over the work zone and returns through grills near the floor, pulling dust away from the operator's breathing zone. Anchormen manufactures RLAF units, including flameproof models, for pharma plants across India.

Filtered supply air comes down from the ceiling of the booth at about 0.45 m/s. Dust generated during weighing or sampling is carried down and back to low-level return grills, through pre-filters and HEPA filters, and most of the air is re-circulated. A small share is exhausted to keep the booth under slight negative pressure relative to the room.

We build RLAF booths in SS 304 or SS 316 with two- or three-stage filtration, H14 HEPA filters on supply and exhaust, Magnehelic gauges and variable-speed blowers. A DOP port allows filter integrity testing, and pressure and air-volume measurement can be added when required.
When solvents or combustible dust are handled, standard electricals are not safe. Our FLP RLAF uses flameproof electrical parts for these areas.

Our RLAF booths are installed in dispensing and sampling rooms of formulation and API plants. Booth width and height are made to suit your room and the containers you handle. Also see our dispensing booth page.
Dust is drawn away from the breathing zone.
On supply and exhaust air.
Uniform vertical downflow.
As per application.
For solvent and dust hazard areas.
For HEPA integrity tests.
| Airflow | Vertical downflow, low-level return |
|---|---|
| Structure | SS 304 / SS 316 |
| Filtration | Two or three stage; H14 HEPA + EU-6 pre-filter |
| Air velocity | 0.45 ± 0.05 m/s (90 ± 20 FPM) |
| Pressure gauge | Magnehelic differential |
| Blower | Centrifugal / backward curved, variable speed |
| Testing | DOP port / atmospheric nozzles |
| Power | Single phase, 220 V, 50 Hz |
Standard design values; final specifications depend on model and order.
SS EquipmentA reverse laminar air flow booth for weighing, sampling and dispensing powders with operator protection.
SS EquipmentA flameproof reverse laminar air flow booth for dispensing and sampling where solvents or combustible dust are present.
Answers to what buyers most often ask about reverse laminar air flow (rlaf).
A LAF protects the product only. An RLAF protects the product and the operator by drawing dust away from the breathing zone.
Yes, RLAF units are commonly called sampling or dispensing booths.
Yes, our FLP RLAF uses flameproof electricals.
Tell us what you need. Our team will reply with drawings, options and a quotation.